Group sitemap
Site Map
- Avon Rubber p.l.c.
-
Virtual ...
- ISI
- Events
- Events ...
- Other Information
-
Please use the below links to for futher information ...
- Contact Us
- If you have a general enquiry or cannot find ...
- About Us
- Awards
- Protection
-
- Industrial
-
- HOME
-
- copy of C420
- SHOW ALL
- NH15
- The NH15s low cost makes it ideal for oil and gas workers seeking immediate or emergency respiratory protection in a CBRN or H2S sour gas scenario.
- ARAP-E
- The ARAP-E is equipped with a 5, 10 or 15 minute escape cylinder for maximum escape safety margin.
- AS1 Single
- EEBA
- The ISI EEBA (Emergency Escape Breathing Apparatus) is NIOSH approved and provides fast respiratory escape protection from atmospheres that have become immediately dangerous to life or health (IDLH). Its simple design allows the wearer to begin escape in just seconds.
- Frontier
- The ISI Frontier is an easy to use and easy to maintain industrial SCBA with NIOSH approval. It offers high flow rates and low cost of ownership compared to other SCBAs thanks to few replacement parts and the low cost to replace them.
- Vanguard
- The Vanguard is designed for all applications where respirator protection is needed with the exception of fire use. It is CFR42, Part 84 NIOSH approved. Industrial users have been using the Vanguard SCBA for over 15 years because of its simple, low-maintenance design.
- Advanced Search
- Search ...
- Select Your Region
- Avon Protection - ISI
- Protection Home
- ISI
-
-> ...
- Other Information
-
Please use the below links to for futher information ...
- Technical Bulletins
- ISI Product Financing
- ISI offers complete product financing through partner institutions, providing ...
- About Us
- Founded over 25 years ago, ISI has worked closely ...
- Contact Us
- ISI 922 Hurricane Shoals Road, Lawrenceville, Georgia 30043, USA ...
- Enquiries
-
If you are interested in finding out further product ...
- ISI Enquiry Form
- ISI enquiry form page
- Become a Distributor
- Become an ISI distributor
- ISI Sales Representative Finder
- Dinner and Demo Response
- One of our Regional Sales Managers will contact you ...
- C4 Battery Registration Response
- Thanks for registering your Viking Z Seven with C4 ...
- Respiratory Solutions Response
- One of our Regional Sales Managers will contact you ...
- nvisioninfo Response
- One of our Regional Sales Managers will contact you ...
- Emergency Escape Response
- One of our Regional Sales Managers will contact you ...
- Links
- ISI's Parent Company Avon Rubber p.l.c. Federal ...
- Warranty Registration
- Contact ...
- Protection US
- Market Solutions
-
Firefighters, hazmat works, first responders and law enforcement officers ...
- Firefighting
-
When firefighters ask for innovative products, they look to ...
- Self Contained Breathing Apparatus
- ISI recognizes the diverse needs of the fire service. ...
- Thermal Imaging
- Lightweight, High Performance, Low Price – Thermal imaging solutions ...
- Communication Systems
-
ISI’s communication systems are one of the reasons its ...
- Radio Interface
- Radio interface cables are available to integrate most make ...
- TEAMS
- TEAMS: Telemetry Electronic Air Management System Accountability systems such ...
- Firefighting Accessories
- Firefighters rely on durable, reliable, life-saving equipment to do ...
- Industrial
-
Protecting you with easy to use respiratory protection Since ...
- Self Contained Breathing Apparatus
- ISI recognizes the diverse needs of the industrial and ...
- Thermal Imagers
- Lightweight, High Performance – Thermal Imaging solutions to protect ...
- Escape Devices
-
ISI knows escape devices need to be effective yet ...
- ARAP-C and ARAP-E
- Avon-ISI’s premier line of Type-C respirators gives you choices ...
- ARAP-MER
- EEBA
- Simple and fast respiratory escape protection from IDLH ...
- Accessories
- Accessories like ISI’s AS1 Single, a mobile air ...
- Homeland Security
- Details of our homeland security products are available in ...
- Product Solutions
-
We offer a wide range of respiratory protection equipment ...
- Self Contained Breathing Apparatus
- Thermal Imagers
- Escape Devices
- Air Supply and RIC System
- First responders and industrial users rely on durable, reliable, ...
- Product Training
- Contact ...
- NIOSH Approved Products and NFPA Compliant Products
- ISI products are regulated by two main governing authorities. ...
- Air Purifying Respirators
- ISI offers two versions of the air purifying ...
- ISI Echo Series
- Introducing the new ISI Echo Series Locating downed firefighter's just got a whole lot quicker!! ISI introduces the latest in ultrasonic tracking technology with the ISI EchoTracer and ISI EchoSeeker. This technology is built-in to the Viking Z Seven SCBA and ISI 3500 Thermal Imaging Camera for more functionality and a lower profile.
- Distributor Extranet
- AEF
-
Virtual ...
- AEF Sitemap
- Site ...
- Actions
-
- Contact Us
- Call +1 601-799-1217 to speak with a Sales Representative.For ...
- About
- AEF is part of the Avon Rubber group and ...
- Avon Dairy Solutions
-
Avon Dairy Solutions is the world’s leading manufacturer of ...
- About
- Avon Dairy Solutions is the world’s leading manufacturer of ...
- Enquiries
- Contact ...
- Our Pedigree
- Avon Dairy Solutions has a rich history. Avon itself ...
- Contact Us
- Outside of North America : Avon Dairy Solutions Hampton ...
- AIM
-
Avon Impact Management products include wall fenders, speed ramps, aircraft chocks, wheel chocks, marine fenders, corner fenders, d fender, rubber extrusions, garage stops.
- Marine Fenders
-
Marine Fenders from Avon Impact Management (AIM) are in ...
- Canal Boat Fenders
- AIM Canal Boat Fender A Proven design which uses ...
- 'D' Fenders with 'D' Bore
- Flat 'D' Fenders with 'D' Bore
- Pointed 'D' Fenders with 'D' Bore
- Flip sided 'D' Fenders with 'D' Bore
- Solid Rectangular Fenders
- Hollow Rectangular Fenders
- Hollow Cylindrical Fenders
- 'D' Fender with Circular Bore
- ‘D’ Fender with Circular ...
- Winged Fenders
- Keyhole Fenders
- Hollow 'B' Fenders
- Solid 'B' Fenders
- Solid 'D' Fenders
- Fast Ferry Fenders
- Gunwale Fenders
- Gunwale Fenders O/A Dimensions Bore Diameter Die No Weight Kg/M W H 220 152 ...
- Wedge Fenders
- Extruded Solutions
-
Extruded Solutions, speed ramps, wheel chocks, corner fenders, wall fenders
- Wall Fenders
-
AIM's Wall Fendering products have been designed to reduce ...
- D-Fender
- Part ...
- Wall Fender
- Part ...
- P Section
- Part ...
- Corner Fenders
-
High quality product designed to:
Reduce ...
- Heavy Duty Corner Fender
- Part ...
- Medium Duty Corner Fender
- Part ...
- Chocks
-
- Vehicle Stops
- Vehicle Stops
- Garage Stop
- Part ...
- Commerical Aircraft and Vehicle Chocks
- Speed Ramps
- Speed Ramp, Speed Ramps, Sleeping Policeman.
- Expansion Joints
-
Expansion joint seals are designed ...
- Expansion Joint Seal
- Part ...
- ARTIS
-
ARTIS are an independent material consultancy specialising in the ...
- Material Testing
-
Materials Testing lies at the heart of what we ...
- Physical Testing
-
Standard measures of physical properties of materials can be ...
- Physical Testing in Detail
- ARTIS has facilities for a comprehensive range of standard ...
- Chemical Testing
-
Chemical analysis can be used to assess raw materials, ...
- Chemical Testing in Detail
- We possess a very well equipped analytical laboratory with ...
- New Header Test
- We possess a very well equipped analytical laboratory with ...
- Specialist Testing
-
Specialist test facilities available allow the generation of design ...
- Specialist Testing in Detail
- ARTIS has a range of more specialist test equipment ...
- Compounds
-
One of the key strengths of ARTIS is the ...
- Standard Reference Elastometers (ISO13226)
- We have the capability to mix a wide range ...
- Small Quantity Supply
- Most rubber compounds can be mixed and supplied up ...
- Consultancy
- The vast experience gained in dealing with live manufacturing ...
- R&D
-
Research and Development is a core competence of ARTIS ...
- Product Development
-
Major product development programmes require the use of multidisciplined ...
- Product Development in Detail
- ARTIS can input to multidisciplined teams bringing expertise to ...
- Compound Development
-
Small scale mixing facilities are ideal for rubber compound ...
- Compound Development in Detail
- The team at ARTIS have spent many years developing ...
- Process Development
-
Experience in manufacturing allows ARTIS to apply many of ...
- Process Development in Detail
- ARTIS has a selection of equipment to evaluate the ...
- Test Methods
-
Evaluation of product functionality is crucial to understanding service ...
- Test Methods in Detail
- Many People use standard rubber or plastics test methods ...
- Engineering Applications
-
Design of rubber – fabric structures is part of ...
- Engineering Applications in Detail
- In the design of a product, under standing the ...
- Contract Research
-
Often the whole development project is bigger than a ...
- Contract Research in Detail
- ARTIS is well placed to participate in funded research ...
- Consultancy
- Service failures and production problems require a different approach ...
- Training
-
ARTIS can offer a selection of training packages which ...
- Dairy / Vet training
- 1.5 day CPD course for the vet Testing the ...
- Statistics for Industry
- Statistics are a crucial part of industrial processes and ...
- Quality Systems
- Disciplined Problem Solving - short course for simple 'something ...
- Rubber Compound Design
- ARTIS can offer basic training in compound design, exploring ...
- Rubber in Dynamic Applications
- Rubber is often used in dynamic applications, and unless ...
- Legal Support
-
ARTIS can provide advice and help in these areas ...
- REACH
- REACH, which replaces numerous pieces of existing legislation, transfers ...
- IMDS Submissions
- IMDS (International Material Data System) was developed by the ...
- Restricted Substances and Food Contact
- We also provide advice and development services for the ...
- Expert Witness and Failure Analysis
- ARTIS has registered experts in materials, engineering and failure ...
- Case Studies
- These case studies illustrate how our expertise can be ...
- Other Information
-
- About ARTIS
-
ARTIS was created as a result of the reorganisation ...
- History
- ARTIS has been formed out of the ‘Avon Materials ...
- Personnel and Experience
- At ARTIS our team is comprised of all the ...
- Contact Us
- Enquiries
- Contact ...
- News
-
News ...
- Sevalco Closure
- It is with great sadness that ARTIS learns of the closure of the Sevalco carbon black plant at Avonmouth, Bristol. ARTIS has long links with the team at Sevalco plant and Columbian European Central Laboratory (ECL) and has great respect for the team at ECL.
- Artis offers engineering expertise
- ARTIS offers engineering expertise article from the European Rubber Journal - 17 December 2008
- Chamber of Commerce - Site Visit to Artis
- Members of the Wessex Association and Westbury Chamber of Commerce recently had the opportunity to have a look around ARTIS, which is an advanced laboratory supporting the innovation, development and testing needs of the European Polymer Industry.
- ARTIS to work with Gammadot Rheology
- Gammadot Rheology and ARTIS, (the commercialised research arm of Avon Rubber p.l.c), are investigating potential projects & services the two companies can co-operatively offer to the polymer industry.
- ARTIS in consortium offered £1.2 million grant
- Symphony Environmental Technologies Plc (“Symphony”), the degradable plastics and wasteto-energy Group, announces that it’s wholly owned subsidiary, Symphony Energy Ltd (the “Company”) has now been officially advised by the Technology Strategy Board that the Company and its consortium partners have been offered a £1.19m grant for collaborative research and development in the area of High Value Manufacturing, for the consortium’s Rubber Product Enhanced Recovery Technology project (“RìPERT”). The Company is the lead partner; the other members of the consortium are ARTIS (a business of Avon Rubber P.l.c.), Imperial College London, ABB Limited (Robotics Division), Hughes Pumps Limited and Credowan Limited (Subsidiary of Cobham Plc).
- ARTIS presents at TAC 2008
- The Presentation will look at the combined use of TGA and DMTA and other analytical techniques, to look at changes in elastomeric materials that occur as a result of contact with cleaning chemicals used in dairy applications.
- AVON Rubber plc announces ARTIS
- Avon is delighted to announce the launch of ARTIS, an acronym for Avon Rubber Technology Innovation and Science to the commercial market. ARTIS is an advanced laboratory in Westbury, Wiltshire, England dedicated to material testing, research and development, training, legislative support including expert witness capability. ARTIS will offer cost effective expertise in all of these specialist areas.
- Anaconda
- ARTIS, have recently been awarded a development contract from the Carbon Trust supporting the development of the Anaconda sea energy device. The Anaconda is a new concept for the generation of electricity from sea energy and is currently being developed by Melksham based Checkmate Sea Energy.
- Chem Patch
- ARTIS has been awarded a $270,000 development contract with the US Army, Research Development of Engineering Command (RDECOM) through the Technology Support working Group (TSWG) for the development of an integral pass through protective patch for level A protective garments.
- Emerging Health Challenges for Rubber
- Paul Marchant of ARTIS will be presenting a paper on the 2nd July 2010 at the IOM3 headquarters in London. The Rubber in Engineering Group afternoon technical discussion meeting, co-organised by the materials KTN, will be focusing on the “Emerging Health and Legislation Challenges for Rubber”.
- ARTIS Expands Capability
- 3 years after launching as an independant polymer consultancy, ARTIS have established a solid customer base, and are now expanding their testing capabilities with the purchase of a Perkin Elmer Clarus 560S GC-MS.
- Rubber in Food Contact Applications
- Paul Marchant of ARTIS presented a paper on “Rubber in Food Contact Applications” at the IOM3 headquarters in London on Friday 2nd July, as part of the Rubber in Engineering Group afternoon technical discussion meeting.
- Recycling of Rubber
- The ‘Challenges Posed by the Recycling of Rubber’ will be the topic of discussion at the next Rubber in Engineering Group afternoon technical discussion meeting at the IOM3 headquarters in London on the 10th December 2010.
- Artis Appoint Stephen Millington
- On our return from the Christmas break the ARTIS team will be joined by Stephen Millington in the role of Development Scientist.
- Artis Partner Kumho Tyres
- Gerardo Sica of Kumho tyres is due to present a paper on tyre tread compound biodegradation at this years Tyre Technology Conference in Cologne, Germany on 15th to the 17th of February 2011. The work was kindly sponsored by the Korean government and ARTIS have been a partner in this very interesting and challenging project.
- Still Bouncing Back - Artis Present at Manchester Polymer Group
- Paul Marchant of ARTIS presented a paper on “Biodegradable and Sustainable Tyre Tread Compound Development” at the Manchester Polymer Group meeting on Monday 16th May 2011 at Old Trafford in Manchester. The talk detailed a joint project that was carried out between Kumho Tyres and Artis, to develop a more readily biodegradable tread compound.
- Exciting Opportunity To Join The Artis Team
- Artis are looking for a dynamic graduate ideally with some industrial scientific experience in a commercial environment, to add to the team. The candidate will be outgoing and have excellent interpersonal and communications skills, being required to communicate effectively at all levels from shop floor operator to chief executive.
- What can we do for you?
-
- Test Something
- Develop a Material Process
- What sort of development is needed? Develop a compound?Develop ...
- Analyse a Problem
- What sort of problem? Solve a research problem?Failure ...
- Provide Training
- What sort of training? Quality systems?Dairy applications?Statisitcs for industry?Rubber ...
- Give Legal Guidance
- What sort of guidance? Provide an expert witness?REACH legislation ...
- Not Sure
- Develop a compound
- What sort of compound? To a standard specification?To a ...
- Corporate
-
Avon is focused on meeting customer needs through world ...
- Investor Relations
-
Key shareholder information for the individual and institutional investor. ...
- Share Price
- IR_Share_Price_HomeIR_LHS_Navigation ...
- Download Share Price Data
- IR_Share_Price_HomeIR_LHS_Navigation ...
- Regulatory News Announcements
- IR_Share_Price_HomeIR_LHS_Navigation ...
- Financial Reports
-
IR_Share_Price_HomeIR_LHS_Navigation ...
- Annual Report 2010
- Interim Results 31 March 2010
- Annual Report 2009
- Interim Results 31 March 2009
-
- Results
- INTERIM MANAGEMENT REPORT
- Protection & Defence
- Dairy
- Post balance sheet events
- Retirement benefit obligations
- Dividends
- Outlook
- Statement of Directors' responsibilities
- Independent review report to Avon Rubber p.l.c.
- Consolidated Income Statement
- Consolidated Statement of Recognised Income and Expense
- Consolidated Balance Sheet
- Consolidated Cash Flow Statement
- Notes to the Interim Financial Statements
-
- Note 1. General information
- Note 2. Basis of preparation
- Note 3. Restatement of comparatives
- Note 4. Accounting policies
- Note 5. Segmental analysis
- Note 6. Finance income and costs
- Note 7. Taxation
- Note 8. Results from discontinued operations
- Note 9. Dividends
- Note 10. Earnings/(loss) per share
- Note 11. Provisions for liabilities and charges
- Note 12. Share capital
- Note 13. Changes in equity
- Note 14. Cash generated from/(used in) operations
- Note 15. Analysis of net debt
- Note 16. Seasonality
- Note 17. Principle risks and uncertainties
- Note 18. Shareholder information
- Financial Calendar
- IR_Share_Price_HomeIR_LHS_Navigation ...
- Analyst Reports
- IR_Share_Price_HomeIR_LHS_Navigation ...
- Statutory Shareholder Information
- REGISTERED OFFICE Corporate Headquarters Hampton Park West Semington Road ...
- Analyst Coverage
- The following analysts currently provide research on the Company. ...
- copy of Financial Calendar
- Old Financial Calendar(Events Module)
- Other Information
-
- Contact Us
-
If you have a general enquiry or cannot find ...
- Avon Site Locations
-
United Kingdom
Avon Rubber p.l.c. Corporate Office Hampton Park ...
- Avon Rubber p.l.c. Corporate Office
- Address:Hampton Park WestMelkshamWiltshireSN12 6NBUK Tel: +44 (0)1225 896800Fax: ...
- Avon Protection Systems
- Address:Hampton Park WestMelkshamWiltshireSN12 6NBUK Tel: +44 (0)1225 896705Fax: ...
- ARTIS - Site Location
- Address: Hampton Park West Melksham Wiltshire SN12 6NB ...
- Avon Protection Systems - Site Location
- Address:503 Eighth StreetCadillacMichigan49601-9282USA Tel: +1 231 779 6200Fax: +1 ...
- Avon Protection Systems - Baltimore
- Address: Business and Innovation Group 1361 Brass Mill Road ...
- Avon Dairy Solutions and Milk-Rite - East Coast
- Address:110 Lincoln StreetJohnson CreekWisconsin53038-0009USA Tel: +1 920 699 ...
- Avon Engineered Fabrications Inc.
- Address:1200 Martin Luther King BlvdPicayuneMississippi39466-5427USA Tel: +1 601 ...
- Avon ISI
- Address:922 Hurricane Shoals RoadLawrencevilleGeorgia 30043USA Tel: +1 678 ...
- Milk-Rite - West Coast
- Address:4824 Enterprise WayModestoCalifornia95356USA Tel: +1 209 545 0198 ...
- Avon Rubber p.l.c. UK Manufacturing
- Address:Hampton Park WestMelkshamWiltshireSN12 6NBUK Tel: +44 (0)1225 896300Fax: ...
- Avon Dairy Solutions
- Address:Hampton Park WestMelkshamWiltshireSN12 6NBUK Tel: +44 (0)1225 896575Fax: ...
- Directions - Melksham House
- Address:Cooper Avon Tyre Sports & Social ClubMelksham HouseMarket PlaceMelkshamWiltshireSN12 ...
- Avon Protection Systems (ASIA)
- About Us
-
Avon Rubber p.l.c. is a world leader in the ...
- History
-
With a history spanning over a century, you will ...
- The Early Years
- The Avon Mill at Limpley Stoke The Avon story ...
- The War Years and In Between
- The outbreak of World War I coincided with ...
- A Period of Rapid Growth
- Gas Mask ...
- 25 Years of Dramatic Change
- A Time of Expansion
- Into the New Millennium
- Awards
- Media Centre
-
Press enquiries
Please contact Fiona Stewart, Corporate Communications Executive ...
- Company Profile
- Click to view in full (3.1 MB) : BUSINESS ...
- Press Releases
-
News ...
- Trading Update April 2007
- In the light of the forthcoming requirements which will increase the frequency of market reporting and the significant changes in the Group recently, the Company is issuing this update in respect of the half year ending on 31 March 2007.
- ARTIS in consortium offered £1.2 million grant
- Symphony Environmental Technologies Plc (“Symphony”), the degradable plastics and wasteto-energy Group, announces that it’s wholly owned subsidiary, Symphony Energy Ltd (the“Company”) has now been officially advised by the Technology Strategy Board that the Company and its consortium partners have been offered a £1.19m grant for collaborative research and development in the area of High Value Manufacturing, for the consortium’s Rubber Product Enhanced Recovery Technology project (“RμPERT”).
- DEVELOPING NEW ENGINEERING AND MATERIAL PRODUCTS
- Members of the Wessex Association and Westbury Chamber of Commerce recently had the opportunity to have a look around ARTIS, which is an advanced laboratory supporting the innovation, developmentand testing needs of the European Polymer Industry.
- SALE OF AEROSOL GASKET BUSINESS
- On 8 February 2008, the Board of Avon Rubber p.l.c announced that it had exchanged contracts for the sale of its Aerosol Gasket business to Crosslinks Limited, based in South Wales and Corsham, Wiltshire, for a consideration of £1.75 million payable in cash on completion of the sale.
- Sale of Aerosol Gasket business (“the business”)
- The Board of Avon Rubber p.l.c. today announces that it has exchanged contracts for the sale of its Aerosol Gasket business to Crosslinks Limited, based in South Wales and Corsham, Wiltshire, for a consideration of £1.75 million payable in cash on completion of the sale.
- New M50 mask receiving positive reviews from Osan Airmen.
- OSAN AIR BASE, Republic of Korea ‐ Osan Airmen began receiving their new M‐50 protective masks during a mass re‐issue process June 9, replacing the MCU 2 protective mask.
- Firefighter-Focused Web Site Shows Latest NFPA Approved SCBA from Avon-ISI
- LAWRENCEVILLE, Ga., April 8, 2008 – To help firefighters learn more about its latest products and technologies, Avon Rubber’s Avon-ISI has launched the firefighter-focused Avon Fire web site at www.avon-fire.com.
- US GOVERNMENT RESPIRATOR CONTRACT AWARD
- The Company confirms that it has received the multi-year contract valued at US$112million for supply of the M50 military respirator to the US Government.
- Avon Announces the launch of ARTIS
- Avon is delighted to announce the launch of ARTIS, an acronym for Avon Rubber Technology Innovation and Science to the commercial market. ARTIS is an advanced laboratory in Westbury, Wiltshire, England dedicated to material testing, research and development, training, legislative support including expert witness capability. ARTIS will offer cost effective expertise in all of these specialist areas.
- Avon Protection Receives CBRN NIOSH Approval
- CADILLAC, Mich., April 21, 2008 – Specialist and tactical responders can now take advantage of Avon Protection Systems, Inc.’s new C420 powered air purifying respirator (PAPR) system. The C420 blower unit used with the company’s most advanced face masks recently received National Institute for Occupational Safety and Health (NIOSH) CBRN (chemical, biological, radiological and nuclear) approval.
- TRADING UPDATE AND BOARD CHANGES
- In our AGM statement we noted that growth in our Protection and Defence business had been slower than we anticipated and that the Company was expecting confirmation of the multi-year contract for the new M50 US military respirator in the very near future. The regulatory and administrative processes undertake by the US Government for contracts of this value and duration have taken much longer than previously projected.
- AGM Statement
- At the Annual General Meeting to be held today the Chairman, The Rt. Hon. Sir Richard Needham, will make the following statement to shareholders: “At the time of our preliminary statement at the end of November 2007, we said that the Group had reached a number of significant milestones. We had announced that the full rate production decision had been made on our new military respirator and that we had received NFPA certification for our new self-contained breathing apparatus product, manufactured at ISI in Georgia.
- BOARD AND SENIOR MANAGEMENT APPOINTMENTS
- Avon Rubber p.l.c. is pleased to announce the appointment to the Board of Andrew Lewis as Group Finance Director with effect from 8 September 2008.
- Unaudited interim results for the six months ended 31 March 2008
- Commenting on the results, Peter Slabbert, Chief Executive said: “The award of the $112 million, multi-year contract by the US Government should underpin the Group’s return to profitability in the short term and secure a long-term and growing revenue stream for our Protection business. Our immediate priority is on increasing our profits through manufacturing efficiencies and cost reductions and converting significant opportunities for sales of our market leading range of respiratory protection products around the world.
- Hood Debate
- Local MPs Michael Ancram and Andrew Murrison slammed the Home Office and the Police in a House of Commons debate over failure to honour the Office of Government Contracting's Emergency Hood Contract with Avon Rubber at Melksham.
- Preliminary results for the year ended 30 September 2007
- Commenting on the results, Terry Stead, Chief Executive said: “Since the interimannouncement, the Group has reached a number of significant milestones. The second half of 2007 has shown improvement over the first half. With the approval of the new product at Avon-ISI and once the full rate production starts at our Cadillac facility, we expect this to continue. The Board is confident that this, together with continued investment in new product development, will lead to a period of sustainable and profitable growth for the Group.”
- Artis to work with Gammadot Rheology
- Gammadot Rheology and ARTIS, (the commercialised research arm of Avon Rubber p.l.c), are investigating potential projects & services the two companies can co-operatively offer to the polymer industry. Martyn Bennett, ARTIS’ Chief Scientist, commented, "a partner with complimentary rheological skills in the thermoplastics sector will allow us to expand the services we can offer to our clients and we are looking forward to working with Gammadot".
- Trading Update August 2008
- In the interim results announced on 28 May 2008, the Company stated that the award of the multiyear respirator contract by the US Department of Defense (DoD) and the expectation of securing long-term contracts for the Engineered Fabrications business, should underpin the Group’s return to profitability in the short-term. It was further explained that difficulties had been experienced in the production of filters for the M50 respirator, which had led to delays and cost overruns.
- Avon wins new defence contract
- Avon is pleased to announce that it has won, through its US based subsidiary Avon Engineered Fabrications, Inc. based in Mississippi, a five year contract for the supply of 210,000 gallon fuel storage tanks to Applied Geo Technologies Inc. for onward supply to the US Army.
- Period end update
- The Board is issuing this update following the Company’s 30 September 2008 financial year-end.
- Sale of UK Mixing facility
- In January we announced that we were commencing the closure of our UK mixing facility, a process which we were pursuing at the time of the announcement of the interim results in May. We are now pleased to announce that the Group has completed the sale of certain of its mixing facility assets to ATR Compounding Limited for a consideration of £2.05 million, payable in cash. The proceeds will be used to reduce current borrowings.
- Preliminary results for year ended 30 September 2008
- Peter Slabbert, Chief Executive commented: “Our Dairy business remains successful, while the 10 year US Government M50 respirator programme, awarded in 2008, will provide strong and consistent future sales volumes contributing to a return to profitability in our Protection & Defence business. In the current difficult credit markets the agreement of facilities with our bankers to 30 June 2010 gives the Group a stable platform from which to capitalise on the opportunities available to it in its chosen markets.”
- AGM and Interim Statement
- Avon Rubber p.l.c. issues this interim management statement for the period since 1 October 2008, ahead of its Annual General Meeting to be held at 10.30 a.m. today, 21 January 2009.
- 2009 Annual General Meeting
- The Annual General Meeting of the Company was held at Melksham House, Melksham, Wiltshire on 21 January 2009 at 10.30 a.m.
- Additional order from US DoD for world leading M50 mask
- A second award has been received for the M50 JSGPM mask series. The combined value of these awards is $34.4m which is in line with management expectations.
- MoD contract and outsourcing of UK dairy manufacturing
- Avon announces the placement of a further contract by the UK MoD and in addition the Company is proposing to outsource the manufacture of all dairy products in the UK
- 2009 Interim Results
- “Our order book is growing across the world” - Avon announced their interim results on May 21st 2009.
- Interim Management Statement
- Interim Management Statement
- Interim Management Statement
- Avon has continued to make good progress since the half year.
- New Contract Success for Avon
- Avon has received a new 5 year contract award from the US Department of Defense (DoD) for the M53 Protective Mask.
- AIM Launches eBay Store
- Avon Impact Management (AIM), a part of Avon Rubber p.l.c., is launching its very own eBay shop at http://stores.shop.ebay.co.uk/Avon-Impact-Management, due to popular demand
- Unaudited results for the year ended 30 September 2008
- Peter Slabbert, Chief Executive commented: “The 2009 results demonstrate that we can deliver in our chosen markets. Our strong order book, dominant market positions in defence respiratory protection and dairy liners, supported by technologically superior products, growing brand strength and high competitive entry barriers, should enable us to continue to improve profit margins. We are increasing investment in product development and routes to market to aid our business growth.”
- Avon shortlisted for awards
- Peter Slabbert, Chief Executive commented: “The nomination in these two categories is something that everyone at Avon should be hugely proud of. The efforts of all our people have been fundamental to our achievements in 2009 and will remain so in the future.”
- 2010 Annual General Meeting
- The Annual General Meeting of the Company was held at Hampton Park West, Wiltshire on 2 March at 10.30 a.m.
- Trading Update March 2010
- Since our Interim Management Statement in January, trading in the first half of FY 2010 has made further improvement in line with expectations.
- Sale and leaseback of Cadillac facility
- Avon announces the completion of the sale and leaseback of their Avon Protection Systems facility in Cadillac, Michigan, USA to RMD Cadillac, LLC and two other purchasers. The transaction has a sale value of $2.6m (£1.7m) and the net proceeds after fees and other associated costs will approximate the net book value of this asset on disposal. The net proceeds of $2m (after tax) will be used to pay down debt.
- Avon Rubber wins International Award
- Following the recent announcement of our 2010 financial results in November, Avon is delighted to announce that it has been selected as the ‘International Company Turnaround’ Winner for 2010 by the Institute for Turnaround (IFT).
- 2011 Annual General Meeting
- The Annual General Meeting of the Company was held at Hampton Park West, Wiltshire on 3rd March at 10.30 a.m.
- US Department of Defense contract award
- Avon is pleased to announce that it has been awarded a 3 year IDIQ (indefinite delivery indefinite quantity) contract from the US Department of Defense for the continued supply of M61 filters for use with Avon's M50 respirator.
- Additional $19m order from US Department of Defense (DoD) for Avon’s world leading M50 gas mask
- Avon has received a further award under our existing 10 year sole source requirements contract with the US DoD for the supply of M50 JSGPM masks valued at approximately $19m and for delivery in our 2012 financial year.
- Filter Contract Award
- Avon is pleased to announce that it has received a 5 year contract from the Department of Defense (DoD) for the supply of spare filters for its M50 respirator. Like previous contracts for spare filters, the contract is an Indefinite Delivery Indefinite Quantity (“IDIQ”) contract and has a maximum order quantity of 2.4m filter pairs per year and 12m filter pairs over the contract term.
- 2011 Annual General Meeting
- The Annual General Meeting of the Company was held at Hampton Park West, Wiltshire on 2nd February at 10.30 a.m.
- Image Library
- We are happy to supply images for marketing and ...
- PR Contacts
- General Enquiries, Local Media Enquiries and Trade Press : ...
- Events
- Events ...
- Corporate Information
-
Avon is focused on meeting customer needs through world ...
- Board of Directors
- Committees
- Audit Committee The primary role of the Audit Committee ...
- CSR
- The directors acknowledge the importance of corporate social and ...
- ESR
- The Directors continue to recognise the importance of environmental, ...
- Policy Statements
- OUR VISION - "We will be the ...
- Avon Rubber p.l.c.
- IR_Share_Price_Home_new ...
- Avon Rubber p.l.c.
- IR_Share_Price_Home_new ...
- Group sitemap
- Site ...
- Disclaimer
- Terms and ...
- Advanced search
- Search ...
- Group A-Z
- List by ...
- copy of ARTIS
- ARTIS are an independent material consultancy specialising in the ...